Rolling Operators

الوصف الوظيفي
Rolling Operators (Cold Mill , Hot Mill , and Can Recycling)

Job Overview:

Responsible to operate the Tandem Cold Mill from pay-off walking beam up to the exit walking beam through the mill to ensure that mill equipment is working according to quality and operation requirements and ensure the dimensional accuracy of the rolled products. Operate various controls and equipment of the CRM operations and monitors all stages of mill operation to ensure standard quality and operating practices and guidelines are followed. Minimize unit downtime and takes steps to improve performance of facility equipment in coordination with maintenance team. Comply with all the EHS Policies, Procedures, SWIs and SOPs. Submit reports on performance/investigation when requested.
The incumbent is also required to conduct all safety and equipment monitoring actions applicable to his role to prevent safety and environmental, and equipment incidents.

Responsibilities:

Takes reasonable care for his health and safety in the workplace. He must also take reasonable care for the health and safety of others who may be affected by what he does or does not do.
Coordinates with EHS team about any action they take to comply with the EHS act or regulations.
Complies with all the agreed occupational health, safety, and environmental regulations in order to protect people and physical assets.
Ensures proper housekeeping in concerned work areas, so that work can be carried out safely and effectively.
Contributes to near miss and incident reporting.
Contributes to Quality and EHS Audits.
Achieve the target for production tonnage
Achieve the target yield
Achieve the target quality
Reduce the rejection rate
Reduce the quality defects
Ensures that the area is responsible in compliance with environmental regulations and company guidelines.
Responsible for investigation reporting of significant incidents if necessary and required a support from CRU Team.
Interact with all relevant Supplier, with emphasis on major concern especially TCM logistic. Other local authorities if required and necessary.

Pay-Off Section

Ensure the proper selection by verifying the coil number, width, thickness, quality of winding edge cut and
position of head end before or while loading the coil on to the walking beam saddle numbers 1 and 2.
Remove the strapping band on saddle for coil feeding purposes.
Ensure proper feeding of coil on to the pay-off reel mandrel.
Ensure all the equipment in pay-off section is meeting the pre-conditions for auto threading and auto
rolling of first pass.
Ensure timely removal of used strapping bands and scrap.
Make frequent checks of pay-off reel area for smooth operation.
Inform Shift Supervisor regarding any problem pertaining to pay-off reel area equipment to avoid the
delay.
Ensure the proper take-over from the previous shift and handing over to the following shift operator of
pay-off reel section.
Perform additional tasks as directed by the Shift Operations, Supervisor

Mill Section

Ensure the quickest feeding of coil head end into exit reel for 1st pass threading in the belt wrapper mode.
Check the blow off nozzles effectiveness.
Ensure to identify the blockage emulsion nozzles during the spray header nozzle test and inform to the
shift supervisor.
Assist the other team members for quick work and back up rolls change.
Make sure the properly ground and assembled work rolls with roll tags are kept on the roll changing car by
taking out old rolls prior to roll change to avoid delay.
Perform additional tasks as directed by the Shift Supervisor.
Ensure good standard of housekeeping in the mill section area.
He shall be qualified and licensed to operate crane for transferring W/R and BUR.

Exit Walking Beam

Ensure the proper identification number is marked on each cold rolled coil coming out of mill.
Ensure the automatic coil typing machine is working properly.
Perform additional tasks as directed by the Shift Supervisor.

المهارات
Requirements:

High school or technical diploma
Experience
Minimum of 5 years and above work-related experience in Aluminium or Rolling Mills industry.
Detailed technical knowledge of the specific process being operated is required.
Experience writing high quality reports.
Demonstrated experience building highly motivated teams.
Extensive knowledge of the rolling mill industry.
Team player with strong interpersonal and communication skills.
Ability to have good shop floor control.
Ability to work with diverse groups
Ability to establish rapport with senior managers.
Ability to prioritize work in an environment with multiple and conflicting interests.
Ability to work independently with minimal supervision.
تفاصيل الوظيفة
منطقة الوظيفة المملكة العربية السعودية
قطاع الشركة الاستعانة بالمصادر الخارجية للموارد البشرية
طبيعة عمل الشركة صاحب عمل (القطاع الخاص)
الدور الوظيفي الإدارة
نوع التوظيف دوام كامل
الراتب الشهري غير محدد
عدد الوظائف الشاغرة 1
المرشح المفضل
عدد سنوات الخبرة الحد الأدنى: 5

https://www.bayt.com/ar/saudi-arabia/jobs/rolling-operators-4657993/