Quality Inspector

الوصف الوظيفي
Job Overview: Perform inspection at supplier’s premises/site, to determine product conformity to P.O/PR, drawings and technical specifications through inspection and tests in accordance with Quality Plans/ITPs. Appraises product Quality.  Key Responsibilities/Accountabilities:
Assigned as inspector to carry out inspection activities on critical packages, in accordance with the approved Inspection and Test Plan or Quality Control Plan to ensure assure
product Quality in a timely manner. All Inspection shall be carried out based on approved documents as per the updated latest SDRL issued by the document control.
Appraises product Quality in accordance with the Purchase Orders/Purchase Requisitions,
Technical Specifications, drawings and Quality Plans.
Ensure no open NCR on the equipment / package prior to release.
Witness Factory Acceptance Test in accordance with the approved procedure and project specification.
Conduct quality audit and/or surveillance as required to assess the compliance of the vendor to the approved procedures and to verify effectiveness of Vendor Quality System.
Receive, review/study inspection assignment package prior to pre-inspection meeting.
Review Lessons Learned website prior to start of work.
Identify change and progress issues if any and liaise with Package Manager and Manager Assurance.
Attend Pre-Inspection Meetings, Kick-off meeting, Pre-production meetings etc., as required.
Inspection and Test plan shall be signed off for the inspections he has witnessed/performed and a Supplier Inspection Report (SIR) shall be prepared for the same. All Inspection results needs to be documented and if any non-conformances exist documentation shall be raised to establish corrective action and close out.
When in process inspections are carried out and inspector identifies outstanding work, this shall be recorded in a punch list format and shall be attached to the Supplier inspection report/Inspection release photographs/test reports to be attached as required.
Monitor the document requirements of the project from the beginning to as it progresses to the final data dossier in accordance with the approved Manufacturers Data Record or
Quality dossier index.
Stamp and sign all documents/test reports/certificates reviewed, inspections witnessed.
Proactively informing vendors about the lessons learned of past projects thru’ lessons learned sessions.

المهارات
Basic Qualifications:
3+ years experience in vendor inspection of valve and piping components, including welding inspection, NDE, painting, witness Factory Acceptance Test of valves.
Bachelors Degree in Mechanical Engineering /Diploma or Equivalent.
ASNT,CSWIP 3.1, BGAS, NACE Qualification
Auditor Certification
Required Aramco Qualification for QM Numbers:
QM03 - Mechanical-Gen(01-04,13,31,32)
QM04 - Non-Destructive Examination
QM05 - Line Pipe (01)
QM06 - Fabricated Piping (01)
QM07 - Valves (04)
QM08 - Fittings (03)
QM09 - Gaskets (06)
QM11 - Coatings - Critical
QM12 - Coatings - Non-Critical (09)
QM14 - Fasteners (10)
QM15 - Structural Steels (12)
QM25 - Cranes (70)
QM26 - Rotating Equip-Pumps (79)
QM27 - Rotating Equip-Compressor (78)
QM30 - Pressure Vessels (32)
QM31 - Heat Exchangers (32)
QM34 - Tanks
QM35 - Skid Mounted Equip-Mech (34)
QM37 - Relief Valve, Control Valve(34)
QM44 - HVAC (27)
QM84 - HIC testing
تفاصيل الوظيفة
منطقة الوظيفة دبي, الإمارات العربية المتحدة
قطاع الشركة النفط والغاز
طبيعة عمل الشركة صاحب عمل (القطاع الخاص)
الدور الوظيفي مراقبة الجودة
نوع التوظيف دوام كامل
الراتب الشهري غير محدد
عدد الوظائف الشاغرة غير محدد
المرشح المفضل
المستوى المهني متوسط الخبرة
عدد سنوات الخبرة الحد الأدنى: 3
الشهادة بكالوريوس/ دبلوم عالي

*** تقدم على الرابط التالي : Apply on the following link ***
https://www.bayt.com/ar/uae/jobs/quality-inspector-4128839/